Procyon red colour?

[craighome]

My procyon isn't showing the red leds in the glasses - it hasn't done this since I received it. Blue and green working great

Seems to be a problem either with the lightframe connector into the procyon/ or cable fault

All help useful on resolving this - not sure what else i can do

Many thanks

[Andy]

Hello;

Sometimes the connector doesn't fit securely into the socket.

Here's a suggestion:
http://www.mindplacesupport.com/foru...ight=connector

Let us know if that helps.

-Andy.

[craighome]

Thanks... tried that but the connector is pretty tight now and still same problem.

Waggling the cable at a certain point makes the red light come on so think it's a cable problem - incidentally when the red does light it seems three times the brightness of the blue or green also so not sure if that is another indication.

Will see if I can get a replacement ganzframes sent to me (or if the connector is a standard part from electronics stores i might just fit a new one - can you clarify this?).

Also considering the ganzframes adaptor kit for using my proteus glasses

Many thanks

[Andy]

Send me a PM (Private message) with where and when you purchased the Procyon, your address, phone # and e-mail, and we'll see about getting you some replacement lightframes.

-Andy.

[Projects UK]

Andy.. I have a ProCyon I get no red light just blue and green, I had this bought for me last year as a present, but the person who bought it is now no longer with us so I could not send it back for repair.I put it away and did not use it however I would like to. The red light is not visible at all. can you give me the specs I have a twin beam scope so I will try to see where the problen lies in the cable or in the controller connector or in the driver..

Regards T.J.N.

[Andy]

Hello TJN;

Did you try the suggestion in the above post? http://www.mindplacesupport.com/foru...=4585#post4585

-Andy.

[Projects UK]

Hello TJN;

Did you try the suggestion in the above post? http://www.mindplacesupport.com/foru...=4585#post4585

-Andy.

Andy I tried the method in the link.. plug is nice and tight now but still no red led, can you give me the pin outs so I can test it. I will buy a lead from maplin or RS and strip it back

[Andy]

The colour code is shown in this post. http://mindplacesupport.com/forum/sh...=3511#post3511, but I don't know the pinoout.

If you contact me via PM (Private Message) I will see if I can help you get this fixed under warranty.

-Andy.