proteus to PC cable

[yvanos]

Hello,
I want the schematics of the cable from Proteus to PC (DB9). I had it, but by moving it dissapeared - or was lost...
Yvanos

[Andy]

I don't have that info at hand, but it would be easy to figure out with a continuity or ohm meter.

[CraigT]

In case you haven't had the chance to check it...

Body = Pin 5
Ring = Pin 3
Tip = Unconnected

Cheers,
Craig

[yvanos]

Many thanks for your advice, Craig. Otherwise. we can found it on forum ()...
I made the cable this night, I am amateur radio and It is OK.
I have some questions, am beginner with Proteus:
- When we load the new sessions from PC to Primary or Utility, how we can know what is the name of the session?
- begginner how I..., can be just a little confused at first use of the Proteus, for ex. setting the brightness and volume.
Someone have an advice for me?
Yvanos

[Andy]

Glad you got it working, Yvanos! (Thanks, Craig!)

You would do well to do a little reading of the information on this forum. There is a lot of good information regarding the use of the Proteus, suggested sessions and settings that have worked well for other people.

After you have done some reading and experimenting yourself, if you have any questions, please come back and start a new thread with the topic of the question you have. I'm sure many here will be more than happy to help you then.

Good luck and enjoy!

-Andy.