Can someone please tell me the proper Frequency, Amplitude, DC offset, Duty Cycle, and Phase settings in the Procyon Editor to create the color's:
Orange
Yellow
Purple
Many Thanks!
Can someone please tell me the proper Frequency, Amplitude, DC offset, Duty Cycle, and Phase settings in the Procyon Editor to create the color's:
Orange
Yellow
Purple
Many Thanks!
You'll probably have to experiment to find out as I'd be surprised if anyone's tried this and documented it.
The colors change as they pass through your eyelids and the tightness in which you close your eyes can make a big difference in the color so the settings would change depending on the person.
-Andy.
My best guess is that orange and yellow will be tied to the Red LED which you may be able to vary the color by the introduction of green. Brightness of the colors may be relevant so you'd have to experiment.
Purple will be a combination of red and blue and again the brightness of each color will be relevant on what shade you get. In other words, the experiment will be how bright to put the blue and how bright to put the red in order to produce a purple.
In addition, like Andy said - the colors do vary some depending on how tightly you close your eyes. I've also noticed that sometimes it depends on where you look through closed eyes as well. The colors seem to get lighter as you look up and darker as you look straight ahead. You can try this with regular light to see what I mean.
M.
Perhaps this chart will help it uses the same 255-255-255 scheme.
http://www.tayloredmktg.com/rgb/
Nice chart, thanks bevital! Looks like a good place to start and then like Andy and Marisa say, then experiment a bit on brightness and phasing.
Cheers,
TomC
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks