Hi Guys,
there is definitely no way to combine the Procyon together with the Oasis CES!
Together with the Proteus it works fine, as the Proteus lightframe connects via a usual stereo connector, which supplies two different signals (one signal for the red LEDs and one signal for the green LEDs). As the Oasis input and lightframe output also uses a stereo connector and passes the stereo signal through to the lightframe (the stereo signal is simultaneously triggering the two stimulation channels of the Oasis), the compatibility between Proteus and Oasis is provided. (You couldn?t use the Oasis together with a Photosonix or MindGear device though, as those machines use CG polarity. The Oasis uses CP polarity and therefore also requires a CP-Mindmachine like for example the Proteus.
The Procyon lightframe though has a completely different connector (1st problem) which provides not just two but at least 3 different signals (one for each color channel - and therefore 2nd problem). So even if you would find a way to solve the connector problem and transmit the lightframe-signal to the Oasis in order to trigger this device by the Procyon - the Oasis could still only pass on a stereo-signal to it?s lightframe output. Means, that the signal for one of the three color-channels would get lost and you wouldn?t have a real multicolor experience but only a bicolor-experience like with the Proteus.
Regards
Dreamflow
Bookmarks