Update for procyon

[Machuco]

I'm new here in the forum and only speak Portuguese or Spanish. I wonder if there is any possibility arise for new updates Procyon already the last version and the 2:01? Thank you!

[Andy]

Hello and welcome!

The latest Firmware for the Procyon is 2.1.6. On the support site there is a Spanish manual, but that's as much Spanish as we know!

[Machuco]

Excuse me Mr. Andy ignorance where I find this firmware 2.1.6 to update my procyon?

[Andy]

Same link as above: http://mindplacesupport.com/procyon-support/

Let me know which kind of Procyon you have and I can give you more specific instructions.

Here is how to tell what version of Procyon you have:
If the number that flashes on your Procyon when you power it up starts with 1.7 (e.g. 1.7.4) then you have a Rev1 Procyon.
If the number that flashes on your Procyon when you power it up starts with 2.1 (e.g. 2.1.6) and it has a rectangular Ganzframe connection, then you have a Rev2 Procyon.
If the number that flashes on your Procyon when you power it up starts with 2.1 (e.g. 2.1.6) and it has a round Ganzframe connection, then you have a Rev3 Procyon.

[Machuco]

Mr Andy my procyon it has a rectangular ganzframe connection my version are os 2.1.4

[Andy]

Ok, so you have a Rev2 Procyon.

You should download the Procyon Rev1 and Rev2 Editor.

Unzip the file and double-click "ProcyonSetup.exe".

Follow the instructions and let me know if you run into any problems.