Results 1 to 9 of 9

Thread: Flashing Lights

  1. #1

    Question Flashing Lights

    Need help/input on a problem that has developed with my Procyon. When I put the unit into AS anl mode the lights begin to flash without any AS input. They also continue to flash after the session is over and the CD has stoped.

    Any help is appreciated.
    CharlesM

  2. #2
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Flashing Lights

    Hi Charles;

    Probably the noise floor (gate) setting is set too low.

    Have a look at this information which, although is geared towards NP2 setup, also shows how to properly set up the analog AS mode of the Procyon.
    http://www.mindplacesupport.com/foru...read.php?t=550

    Let me know if that doesn't help.

    -Andy.

  3. #3

    Default Re: Flashing Lights

    I will try that. But why would this start now? It was not happening before and I have not changed anything.

  4. #4
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Flashing Lights

    Some possibilities:

    Batteries are low?
    CD volume level is different?
    Different CD or CD player?
    Ground loop?

  5. #5

    Default Re: Flashing Lights

    Tryed the fix that was suggested. Used "step 3" to adjust the AS sensitivity.
    Nothing happened when trying to adjust the NGT level. Seems worse than before now.

    Also now as I go to switch to the AS setting 1CC then ERR appear on the display before going to each setting.

    Ps.
    Batteries are new
    CD player is the same
    CDs are the same
    am not hooked up to the computer or ac adapter

  6. #6
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Flashing Lights

    If you get ERR on the display, then something is wrong with the OS.

    Please try updating the OS again. (assuming you updated it previously)

    Let me know if that fixes the problem.

    -Andy.

  7. #7

    Default Re: Flashing Lights

    Up loaded the OS to the Procyon again. Now all seems to be working fine again. That fix worked great . Thanks for the help

  8. #8
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Flashing Lights

    You're welcome!

    -Andy.

  9. #9

    Smile Re: Flashing Lights

    Hi Andy and Everyone,

    The unit acted up again. Even had buzing on the audio channel. Found the problem and the solution. THE BATTERIES HAD RUN DOWN. Put new batteries in the Procyon and no more error messages and no more problems with AS.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Procyon - no Lights with AS CD
    By Elvish in forum Procyon
    Replies: 7
    Last Post: 02-20-2009, 12:43 AM
  2. Newbie needs help... no color in lights
    By Ntune in forum Proteus
    Replies: 3
    Last Post: 07-15-2008, 10:28 AM
  3. Tables & Lights
    By brett in forum Proteus
    Replies: 5
    Last Post: 03-10-2008, 01:51 AM
  4. does the procyon have audible light flashing tones?
    By landofhealth in forum Procyon
    Replies: 3
    Last Post: 02-27-2008, 01:49 PM
  5. Replies: 10
    Last Post: 11-03-2006, 10:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •