Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Proteus Session Details

  1. #1
    Join Date
    Apr 2006
    Location
    Canada
    Posts
    1,004
    Blog Entries
    4

    Default Proteus Session Details

    Attached is a chart that outlines the target frequencies in each session and a Graphical representation of each session along with a description.
    Attached Files Attached Files
    Last edited by Andy; 10-26-2008 at 05:11 AM.

  2. Default Re: Proteus Session Details

    Thanks Marisa,

    I am new here but had a Proteus (unused) for last three years! Now finding time to get back into it, and your information and amazing prolific output in these forums is most valuable. Thanks again.

    Richard
    Hong Kong

  3. #3
    Join Date
    Apr 2006
    Location
    Canada
    Posts
    1,004
    Blog Entries
    4

    Default Re: Proteus Session Details

    Hi Richard,

    Wonderful news that you are getting back into using the Proteus! I'm glad that you have found our forums useful. Thank you so much for taking the time to write us and tell us. As I've mentioned before, this gesture of thoughtfulness is what inspires us to continue to go that extra mile for the public.



    M.

  4. #4

    Default Re: Proteus Session Details

    Quote Originally Posted by Marisa View Post
    Attached is a chart that outlines the target frequencies in each session and a Graphical representation of each session along with a description.
    Hello Marisa,

    I recently purchased a Proteus and I'm still exploring the machine. The pre-set programs in P1...P49 is fully explained; however pressing the mode button, the reading changes to U01...U14 (not knowing what this is set for), the same applies to Usr (I presume this is saved for personal programming, PC, AS, and DL. other than P1...P49 the setting does make a sound & light waves, nevertheless, I didn't see any material showing the meanings or descriptions of the waves set. Please assist.

    Regards,
    Ahmad
    6106

  5. #5
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Proteus Session Details

    Hello Ahmad and welcome!

    Information regarding all the modes and operation of the Proteus is in the manual that came with your Proteus. If you have lost or misplaced it, it's available as a download here: http://www.mindplacesupport.com/Proteus.htm

    BTW, the U01-U14 set is programmed from the factory with Thoughtstream-Enabled Sessions.

    If you cannot find the answers you need in the manual, please start a new thread and ask away! Someone will surely assist you.

    -Andy.

  6. #6

    Default Re: Proteus Session Details

    Hello Andy,

    Thank you for explanation, I do have the manual but I kind of gotten lost with the programs and so on. I'll try to use the Pxx to get familiar with the machine and maybe try to explore the U01-U14 later.

    Best regards,
    Ahmad

  7. #7

    Default Re: Proteus Session Details

    At one time there was a document that described the U01-14 programs. This is not avaiable right now. The old document was called; ThoughtStream-Proteus GSR-Controlled Programs.

    Cheers,
    TomC

  8. #8
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Proteus Session Details

    The Document you're referring to is here:
    http://www.audiostrobe.com/Biofeedba...S_Programs.pdf
    (albiet a bit out-of-date...)

    -Andy.

  9. #9

    Default Re: Proteus Session Details

    Quote Originally Posted by Andy View Post
    and the Document you're referring to is here:
    http://www.audiostrobe.com/Biofeedba...S_Programs.pdf
    (albiet a bit out-of-date...)

    -Andy.
    Thanks Andy. I have a hard copy of this document but mine has a 'www.syneticsystems.com' under the title. Pretty sure that this is the old MindPlace address.

    Might be a good idea to include this document in the ThoughtStream support area.

    Cheers,
    TomC

  10. #10
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Proteus Session Details

    MindPlace used to be called Synetic Systems a few years back.

    I'll check and see if that's an "official" MP document and try and get it up on the web site.

    -Andy.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 11
    Last Post: 05-26-2007, 02:08 AM
  2. Proteus and ThoughtStream
    By Logan in forum Thoughtstream
    Replies: 5
    Last Post: 12-24-2006, 10:45 AM
  3. Replies: 10
    Last Post: 11-03-2006, 10:47 AM
  4. Problems with Proteus
    By LucidOne in forum Proteus
    Replies: 7
    Last Post: 06-13-2006, 02:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •