Well, it does. From the Kasina User Manual:
http://mindplacesupport.com/kasina/#tutorials
Manual control mode
Use this to select a single frequency which plays
continuously. To access this, select Sessions on the
main menu, then press and hold the middle button
for a second or two. A new screen appears with four
parameters: Beat (pulse rate, in Hz), Pitch (audio
frequency, in Hz), Phase (on/off or left/right) and
ColorSet. Use the top and bottom of the control ring
to navigate between these, and the left and right sides
to change their values. Press the middle button again
for a couple seconds to exit back to the main menu.
There is no built in ambiance generator, but you can modulate any sound file through the Aux connection in ways never possible with older machines. Works with any KBS session, or manual mode
Mod AUX which modulates the incoming sound at the
pulse rate specified in the playing KBS file, but has no
sound from the KBS, even if sound is programmed.
Mod KBS+AUX which modulates both the incoming
sound and uses the tones programmed in the KBS
session, mixing them together.
Mod KBS which plays the incoming sound normally
without modulation, but does use the sound and
modulation programmed in the KBS session, mixing
it with the audio. When playing a KBS file, there is
also an option to adjust the intensity/depth of the
modulation in real time. You can choose between
preset levels by pressing the Right button while the
KBS session plays back. These settings will augment
the settings stored in the KBS file.
Bookmarks