Dunno. Back when I was building the adapters, we were able to get the plug with the cable already wired.
What exactly are you trying to build? (What version of console to what device?)
Dunno. Back when I was building the adapters, we were able to get the plug with the cable already wired.
What exactly are you trying to build? (What version of console to what device?)
-Andy.
Hey, if someone makes a good post, don't forget to click at the bottom of their post to add to their reputation!
An adapter cable from TRRS (female) to Hirose MQ172X-4SA-CV (30).
I bought a second-hand Procyon that has this plug, when I receive it I tell you what version it is.
The connections for TRRS are:
Tip - Red
Ring closest to Tip - Green
Ring closest to Sleeve - Blue
Sleeve - Common
And I still need to know the connections for MQ172X-4SA-CV(30)
Last edited by fumanchu; 07-08-2019 at 09:55 AM.
I would guess it's wired logically:
Pin 1 = RED
Pin 2 = GREEN
Pin 3 = BLUE
Pin 4 = white *not used*
Case = COMMON
So, if this is correct, the connections would be:
HIROSE TRRS 1 TIP 2 Ring 1 3 Ring 2 4 N/C Case Sleeve
I would verify this before sealing up the connectors. Let me know if my guess is correct.
-Andy.
Hey, if someone makes a good post, don't forget to click at the bottom of their post to add to their reputation!
My procyon is here, it's Rev.1.
The connections of the Hirose MQ172X-4SA-CV are:
Pin 1 = RED
Pin 2 = GREEN
Pin 3 = BLUE
Pin 4 = COMMON
Case is not used.
IMG_20190720_145937.jpgIMG_20190720_145437.jpg
Last edited by fumanchu; 07-27-2019 at 04:26 AM. Reason: Reduced picture size
In case anyone's looking for them, there are Male Hirose connectors (with cable) available on eBay.
-Andy.
Hey, if someone makes a good post, don't forget to click at the bottom of their post to add to their reputation!
There are currently 9 users browsing this thread. (0 members and 9 guests)
Bookmarks