Results 1 to 8 of 8

Thread: Procyon red colour?

  1. Default Procyon red colour?

    My procyon isn't showing the red leds in the glasses - it hasn't done this since I received it. Blue and green working great

    Seems to be a problem either with the lightframe connector into the procyon/ or cable fault

    All help useful on resolving this - not sure what else i can do

    Many thanks
    Last edited by craighome; 05-03-2009 at 01:30 PM.

  2. #2
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Procyon red colour?

    Hello;

    Sometimes the connector doesn't fit securely into the socket.

    Here's a suggestion:
    http://www.mindplacesupport.com/foru...ight=connector

    Let us know if that helps.

    -Andy.

  3. Default Re: Procyon red colour?

    Thanks... tried that but the connector is pretty tight now and still same problem.

    Waggling the cable at a certain point makes the red light come on so think it's a cable problem - incidentally when the red does light it seems three times the brightness of the blue or green also so not sure if that is another indication.

    Will see if I can get a replacement ganzframes sent to me (or if the connector is a standard part from electronics stores i might just fit a new one - can you clarify this?).

    Also considering the ganzframes adaptor kit for using my proteus glasses

    Many thanks
    Last edited by craighome; 05-04-2009 at 01:21 AM.

  4. #4
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Procyon red colour?

    Send me a PM (Private message) with where and when you purchased the Procyon, your address, phone # and e-mail, and we'll see about getting you some replacement lightframes.

    -Andy.

  5. Lightbulb Re: Procyon red colour?

    Andy.. I have a ProCyon I get no red light just blue and green, I had this bought for me last year as a present, but the person who bought it is now no longer with us so I could not send it back for repair.I put it away and did not use it however I would like to. The red light is not visible at all. can you give me the specs I have a twin beam scope so I will try to see where the problen lies in the cable or in the controller connector or in the driver..

    Regards T.J.N.

  6. #6
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Procyon red colour?

    Hello TJN;

    Did you try the suggestion in the above post? http://www.mindplacesupport.com/foru...=4585#post4585

    -Andy.

  7. Exclamation Re: Procyon red colour?

    Quote Originally Posted by Andy View Post
    Hello TJN;

    Did you try the suggestion in the above post? http://www.mindplacesupport.com/foru...=4585#post4585

    -Andy.
    Andy I tried the method in the link.. plug is nice and tight now but still no red led, can you give me the pin outs so I can test it. I will buy a lead from maplin or RS and strip it back

  8. #8
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,117
    Blog Entries
    3

    Default Re: Procyon red colour?

    The colour code is shown in this post. http://mindplacesupport.com/forum/sh...=3511#post3511, but I don't know the pinoout.

    If you contact me via PM (Private Message) I will see if I can help you get this fixed under warranty.

    -Andy.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Procyon and MindSpa
    By roseanna in forum Procyon
    Replies: 3
    Last Post: 01-31-2013, 12:33 PM
  2. Procyon - a user review
    By caleb in forum Procyon
    Replies: 10
    Last Post: 09-15-2009, 06:35 PM
  3. Procyon - USB+AS=Noise
    By CraigT in forum Procyon
    Replies: 9
    Last Post: 05-03-2008, 10:50 AM
  4. Questions about products and technology
    By frey in forum The Mind Place
    Replies: 9
    Last Post: 05-31-2007, 11:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •