Results 1 to 4 of 4

Thread: Lost Uxx mode

  1. Default Lost Uxx mode

    I recently update the firmware from 2.0 to 2.8. Then loaded several sessions into the utility memory bank. When I went to check the sessions on my Proteus, the Uxx mode doesn't show.

    I only get Pxx, USr, PC, AS, and DL. The DL appeared to have worked fine for the firmware update( 2.8 displays when the unit turns on) and the sessions upload.

    How do I get the Utility memory bank to show up on my unit with the sessions I uploaded?

    Any suggestions or help would be appreciated.

  2. #2
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,115
    Blog Entries
    3

    Default Re: Lost Uxx mode

    I'm not certain, but you may have loaded your new sessions into the Pxx bank and filled it, leaving no room for any Uxx sessions. Check how many sessions you have in Pxx.

    Assuming you saved your new sessions on your PC, you can always re-upload your Pxx sessions, then carefully upload your Uxx sessions (Being careful to select "Utility Area" before uploading.

    -Andy.

  3. Default Re: Lost Uxx mode

    I attempted to load 20 Uxx sessions. The Pxx shows the original 50 preloaded sessions. Unless there is a problem with the editor I know for certain I loaded inthe Utility memory banks and not the primary.

    Besides, the primary memory banks gives you a second chance to abort and asks are you sure you want to overwrite the primary sessions. I never got this message.

  4. #4
    Join Date
    Apr 2006
    Location
    Calgary, Alberta, Canada
    Posts
    4,115
    Blog Entries
    3

    Default Re: Lost Uxx mode

    Strange. I've never heard of this error before.

    Please try re-installing the OS.

    Let me know if that fixes the problem.

    -Andy.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stuck in dL mode
    By BillGillies in forum Proteus
    Replies: 19
    Last Post: 08-11-2013, 07:40 PM
  2. Could I check what I have down load to Uxx
    By kanar in forum Proteus
    Replies: 4
    Last Post: 05-14-2009, 11:51 PM
  3. New Procyon Software! (June 2008)
    By Andy in forum Procyon
    Replies: 0
    Last Post: 06-18-2008, 04:09 PM
  4. lost my p.XX mode
    By ferryman in forum Proteus
    Replies: 7
    Last Post: 01-29-2008, 09:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •