Middle Decimal point:
If the
middle decimal point is flashing this indicates that
the Proteus is in
digital input mode. Any signal from the
?AUX? jack is routed to the serial communication port and is
blocked from the audio path. Use this mode when connecting
to a computer or ThoughtStream. If the
middle decimal
point is
not flashing this indicates that the Proteus is in
analog input mode, and signals from the ?AUX? jack are
routed to the audio circuitry and heard through the headphones.
To toggle between these two states press the top and
bottom buttons at the same time. You can only do this
while in the ?Pxx?, ?Uxx? and ?USr? modes. The ?PC? and ?dL?
modes default to the ?Digital? input mode while the ?AS? mode
defaults to ?Analog? input mode.
Bookmarks