Problem with audiostrobe cds run on Procyon

[coypu]

Hi andy,
ime running os 1.7.4. ,if i use cd player with anti shake on (even with player stationary) i get a sound like a steam train in both headphones.
I now set up player first i turn off anti shake, 2 set volume to 3/4.
3.turn on procyon, go to as mode ,press play on cd,and whoopee lift off.
Hope this helps regards Coypu.

[Andy]

Thanks for that info coypu. Glad you got it working.

I need to find out what OS Argyro is running.

-Andy.

[Argyro]

Hi Andy. I am sorry for the delay in replying but I was too busy with work.

I am using system 1.7.4

When I run the Procyon in SES mode I hear tones from the Procyon and the volume control on the Procyon brings them up and down.

When I run the Procyon in AS mode I don't hear any tones until I start the AS CD. When I start the AS CD I hear music and tones. The tones I hear in SES mode and in AS mode are similar. However, when I turn the volume up and down on the CD player the tones go up and down following the volume change.

I tried your suggestion for dual output on the CD player and connected the headphones directly to the CD player but the tones are still there. So it seems that the problem is either with the CDs or the CD player (the CD player is fine when I play normal CDs). I tried to listen to the AS CDs from my computer but the tones are still there.

[Andy]

Thanks for getting back to me.
It seems that we have discovered that the issue is that the tones are on the CD itself, not being generated by the Procyon.

I'll have to remember to check that if someone comments about them again. Sorry for the trouble, but we do not make the Audiostrobe CDs so I'm afraid that's as far as we can help with this issue.

-Andy.